CORROSION PREVENTION

CORROSION PREVENTION WITH STRONGBACK®

Corrosion poses a risk to pipelines and structures above ground, below ground and at sea. At sea, continual wave action and air-water interchange will quickly corrode platform risers, pipes, and all other metal structures.

StrongBack is a highly-effective anti-corrosion protection solution due to its simple wet-layup application and water-activated resin component. StrongBack is at home in the water, buried below ground, and in the wet environments where corrosion poses its greatest challenges.

StrongBack can be a permanent, high strength alternative to highly corrosive metal sleeves, welding and other mechanical repairs and provides for a complete fit-up integrity and conformity between the reinforcing wrap and the pipe. When metal- or welding-based repairs are required, StrongBack can be used to encapsulate and seal these.

StrongBack can be applied in the splash zone and underwater, generally without the need and expense of a dry environment or habitat. No underwater welding is required to return a compromised underwater pipeline to full-strength. The StrongBack application procedure is simple and fast, limiting the amount of time that a diver or technician must spend in adverse conditions.

VIEW A TYPICAL STRONGBACK INSTALLATION

We’re Here to Help

Discuss your project with an experienced remediation engineer and receive a customized StrongBack® solution.

Solution by Industry